Thermis Home

Category

Smart Heating

13 articles

The First Hour Is Evidence: Diagnosing How a UK Home Warms from Cold

The First Hour Is Evidence: Diagnosing How a UK Home Warms from Cold

The first hour of a heating cycle is more than a comfort interval; it is a diagnostic record of how a home, its emitters and its boiler behave together. This guide explains how to read smart thermostat logs, room-by-room traces and thermal images to separate slow thermal mass from undersized radiators, trapped air, poor balancing and boiler cycling.

Steam, Sensors and Stolen Warmth: A Bathroom Ventilation Audit for UK Homes

Steam, Sensors and Stolen Warmth: A Bathroom Ventilation Audit for UK Homes

Bathroom extractor fans are often treated as condensation fixtures rather than part of the heating envelope. This audit explains how overrun timers, trickle vents and humidity sensors can become uncontrolled heat-loss routes, and how thermal imaging and simple pressure checks can reveal the problem before a thermostat is changed.

The Eighteen-Degree Evidence Standard: Auditing Winter Warmth at Bed Height

The Eighteen-Degree Evidence Standard: Auditing Winter Warmth at Bed Height

Cold-health alerts for winter 2026 make the 18°C benchmark visible again, but a thermostat in the hall cannot prove a bedroom is warm where a person sleeps. This audit sets out how to use existing smart sensors, overnight logs and simple surface checks to verify warmth at occupant height before buying more equipment.

Front Door Bias: Why a Hallway Sensor Never Tells the Whole Story

Front Door Bias: Why a Hallway Sensor Never Tells the Whole Story

The hallway is the default home for British thermostats, yet it is often the least representative room in the house. This investigation uses thermal-camera evidence and a simple relocation test to show how draughts, door cycles and stratification distort every heating decision — and what to do about it.

The Empty-Room Assumption: Testing Geofenced Heating Against Thermal Mass

The Empty-Room Assumption: Testing Geofenced Heating Against Thermal Mass

Geofencing is often presented as an automatic saving, but location alone cannot tell a smart thermostat how a building stores heat. This diagnostic plan uses thermostat history, occupancy records and outdoor temperature to decide whether away mode should switch off, set back or stay out of the way.

The Room That Reads Warm: Measuring Radiant Comfort Beyond the Thermostat

The Room That Reads Warm: Measuring Radiant Comfort Beyond the Thermostat

A smart thermostat can report 21°C while occupants still reach for a blanket. This guide explains mean radiant and operative temperature in practical terms, shows how thermal-camera surface readings can be paired with air data, and outlines a low-cost globe thermometer for UK homes.

The Heating Log Is the First Diagnostic Tool: Reading Six Months of Smart Thermostat Data

The Heating Log Is the First Diagnostic Tool: Reading Six Months of Smart Thermostat Data

Before buying another smart TRV or boiler controller, UK homeowners can learn a great deal from the heating data already sitting in their app. This guide explains how to export six months of setpoint, cycling and room-by-room call-for-heat records, compare them with local degree days, and spot schedule drift, short cycling and occupancy mismatch.

Pipe Truth: How UK Homeowners Can Verify What a Combi Boiler Is Really Doing

Pipe Truth: How UK Homeowners Can Verify What a Combi Boiler Is Really Doing

Smart thermostat apps often present efficiency as a measurement, yet most infer it from schedules and temperatures. This guide explains how UK homeowners can check flow and return temperatures, gas input and cycling behaviour to see what a condensing combi is really doing, and when to call an engineer.